Canon imageRUNNER ADVANCE 6075 Series Service Manual page 717

E Detail
Location Item
Code Code
E5F0 -8002 -05 Title Paper positioning plate home position error (Finisher-E1)
Remedy 1. The Paper Positioning Plate Home Position Sensor (PI7) is
faulty.
2. The wiring between the Finisher Controller PCB and Stack
Ejection Motor, and between the Finisher Controller PCB
and Shutter Clutch is faulty.
3. The positioning plate drive mechanism is faulty.
4. The Paper Positioning Plate Motor (M4) is faulty.
5. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Positioning Plate Home Position Sensor does not
turn OFF when the Paper Positioning Plate Motor has been
driven for 300 pulses.
E5F1 -8001 -05 Title Paper Ffolding Motor lock error (Finisher-E1)
Remedy 1. The Paper Folding Motor Clock Sensor (PI4) and Paper
Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The feed speed of the paper fold roller reaches 5 mm/sec or
less.
E5F1 -8002 -05 Title Paper positioning plate home position error (Finisher-E1)
Remedy 1. The Paper Folding Motor Clock Sensor (PI4) and Paper
Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The status of the Paper Fold Home Position Sensor does
not change when the paper fold Motor has been driven for 3
seconds.
E5F2 -8001 -05 Title Guide home position error (Finisher-E1)
Remedy 1. The Guide Home Position Sensor (PI13) is faulty.
2. The guide plate drive mechanism is faulty.
3. The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Guide Home Position Sensor does not turn ON when the
Guide Motor has been driven for 700 pulses.
E5F2 -8002 -05 Title Guide home position error (Finisher-E1)
Remedy 1. The Guide Home Position Sensor (PI13) is faulty.
2. The guide plate drive mechanism is faulty.
3. The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Guide Home Position Sensor does not turn OFF when
the Guide Motor has been driven for 50 pulses.
7
Error Code > Error Code > Error Code Details > E500 to E5F6
Description
7 Error Code > Error Code > Error Code Details > E500 to E5F6
E Detail
Location Item
Code Code
E5F3 -8001 -05 Title Aligning plate home position error (Finisher-E1)
Remedy 1. The Aligning Plate Home Position Sensor (PI5) is faulty.
2. The aligning plate drive mechanism is faulty.
3. The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Aligning Plate Home Position Sensor does not turn ON
when the Aligning Motor has been driven for 500 pulses.
E5F3 -8002 -05 Title Aligning plate home position error (Finisher-E1)
Remedy 1. The Aligning Plate Home Position Sensor (PI5) is faulty.
2. The aligning plate drive mechanism is faulty.
3. The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Aligning Plate Home Position Sensor does not turn OFF
when the Aligning Motor has been driven for 50 pulses.
E5F4 -8001 -05 Title Stitcher (rear) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (rear) (SW5) is faulty.
2. The Stitcher (rear) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn ON when
the Stitch Motor (rear) has been driven backward for 0.5 sec.
E5F4 -8002 -05 Title Stitcher (rear) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (rear) (SW5) is faulty.
2. The Stitcher (rear) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The stitching home position Sensor does not turn OFF when
the Stitch Motor (rear) has been driven forward for 0.5 sec.
E5F5 -8001 -05 Title Stitcher (front) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (front) (SW7) is faulty.
2. The Stitcher (front) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn ON when
the Stitch Motor (front) has been driven forward for 0.5 sec.
E5F5 -8002 -05 Title Stitcher (front) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (front) (SW7) is faulty.
2. The Stitcher (front) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn OFF when
the Stitch Motor (front) has been driven backward for 0.5 sec.
7-32
Description
7-32