Check Items When Turning Off The Main Power; Installation Procedure; Assembling The Option Hdd - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.

Installation Procedure

■ Assembling the Option HDD

CAUTION: Points to Caution at Installation
Be sure to install the HDD Connector to the side with screw holes of the HDD
Connector Plate.
Label
9
Installation > [TYPE-3] Option HDD (250GB) + Removable HDD Kit > Installation Procedure > Assembling the Option HDD
NOTE:
Use the parts included in the package of the Option HDD and the Removable HDD Kit.
1) Assemble the Option HDD (250GB).
• 1 HDD Support Plate
• 4 Anti-vibration Dampers
• 4 Spacers
• 1 HDD Connector Plate (Included in the Removable HDD Kit)
• 1 Option HDD
• 4 Screws (W Sems; M3x14)
Screw Hole
Connector
Screw Hole
F-9-305
9 Installation > [TYPE-3] Option HDD (250GB) + Removable HDD Kit > Installation Procedure > Assembling the Option HDD
Option HDD
Connector
HDD Connector Plate
(Included in Removable
HDD Kit)
x4
HDD Support Plate
Anti-vibration
Damper
9-137
Spacer
F-9-306
9-137