Check Items When Turning Off The Main Power; Assembling The Option Hdd - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.

Assembling the Option HDD

CAUTION:
When assembling the Option HDD, be sure to pay attention to the direction.
• Be sure that the label face of the Option HDD is up.
• Be sure that the [A] part of the HDD Support Plate is on the other side of the
connecter.
Connecter
9
Installation > [TYPE-1] Option HDD (250GB) > Assembling the Option HDD
[A]
Label
F-9-261
9 Installation > [TYPE-1] Option HDD (250GB) > Assembling the Option HDD
1) Assemble the Option HDD (250GB).
• 1 HDD Support Plate
• 4 Anti-vibration Dampers
• 4 Spacers
• 1 Option HDD
• 4 Screws (W Sems; M3x14)
Connector
x4
9-115
Option HDD
HDD Support Plate
Spacer
Anti-vibration Damper
F-9-262
9-115