Affix the Antenna Adhesive Tape to the Antenna for MFP and affix the antenna to the
host machine.
CAUTION: Point to Caution at Installation
When opening/closing the Right Rear Cover, be careful not to trap cables.
NOTE:
Keep the remaining tapes for later use as needed.
Antenna Adhesive Tape
Antenna for MFP
18)
Remove the covers of 3 Cord Guides.
9
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expans
F-9-249
F-9-250
9
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expans
CAUTION: Point to Caution at Installation
Be sure to affix the Cord Guide to the area 30mm from the Right Rear Cover 1.
30 mm
19)
Remove the release paper, and affix 3 Cord Guides.