5) Hold the Developing Assembly as shown in the figure, and align the protrusions at both
sides of the assembly with the rails on the host machine.
rail
Protrusion
9
Installation > Installation > Installing the Developing Assembly
rail
Protrusion
Protrusion
F-9-16
9
Installation > Installation > Installing the Developing Assembly
6) Along the rails, insert the Developing Assembly horizontally.
• 1 Connector
7) Close the Developing Assembly Pressure Cover and return the Lock Lever to the original
position.
8) Secure with the Screw (Binding; M4x6).
9) Close the Right Cover.
9-12
F-9-17
F-9-18
9-12