4
Parts Replacement and Clearning > Image Formation System > Removing the Drum Drive Unit
2) Loosen the screw and move the Belt Tensioner in the direction of the arrow, and then again
tighten the screw.
3) Remove the belt from the pully.
4
Parts Replacement and Clearning > Image Formation System > Removing the Drum Drive Unit
4) Remove the transformer.
• 2 Screws
• 3 Connectors
F-4-293
5) Free the harness and remove the Transformer Support Base.
• 1 Screw
• Harness
F-4-294
x2
x3
F-4-295
F-4-296
4-172
4-172