Reader (R-Con>P001 To P005) - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ Reader (R-CON>P001 to P005)
Address bit Name
P001 0 Scanner Unit HP Sensor
Interruption
1 DDI-SPO1
2 Fan Lock Signal (Reserve)
3 DDI-SRTS
4 DDI-SCPRDY
5 Silent Mode
6 Board Test
7 12V Power Supply Monitor
P002 0 24V Power Supply Monitor
1 Reader-DADF Connect
2 Location Information 0
3 Location Information 1
4 Debug LED
5 Memory Identification
6 Model Identification
7 Original Size Sensor 1
P003 0 Original Size Sensor 2
1 DADF Sensor 1
2 DADF Sensor 2
3 Scanner Unit Heat Exhaust Fan
Lock Signal
4 Scanner Unit Cooling Fan Lock
Signal
5 LED Select 1
6 LED Select 2
7 -
8
Service Mode > COPIER > I/O (I/O display mode) > Reader (R-CON>P001 to P005)
Symbol Remarks
SR2 1: HP
- Not used
- -
- 0: Reception is available
- 0: Controller ready
- 1: Normal start-up, 0: Silent start-
up
- 1: Normal start-up, 0: PCB check
- 0: Power supply
- 0: Power supply
- 1: Connect, 0: Unconnected AP
- Not used
- Not used
- Not used
- 1: Model with memory, 0: Model
without memory
- 1: X-system or Copyboard, 0:
S-system
CF1 0: Original presence
CF2 0: Original presence
SR1 1: Close, 0: Open
SR3 1: Close, 0: Open
FM1 1: Failure
FM2 1: Failure
- DIPSW2, 3 (1,1): Rank A, (1,0):
Rank B, (0,1): Rank C
-
- -
8 Service Mode > COPIER > I/O (I/O display mode) > Reader (R-CON>P001 to P005)
Address bit Name
P004 0 B_DDI_SPI1
1 B_DDI_SCTS
2 B_DDI_SPRDY
3 Debug Inspection Activation LED
4 DF/Reader Selector
5 Size Detection LED
6 Watchdog Output
7 Scanner Motor Current Setting 1
P005 0 Scanner Motor Current Setting 2
1 Scanner Motor Reset
2 Scanner Motor Enable
3 Scanner Unit Cooling Fan ON
4 Scanner Motor Direction
5 -
6 -
7 -
8-51
Symbol Remarks
- Fix to 1
- 0: Transmission is available
- 0: Engine ready
- 1: ON
- 1: DADF, 0: Reader
- 1: ON
- 0: (Toggle operation)
M1 (0,0): 100%, (0,1): 75%, (1,0):
50%, (1,1): 25%
M1
M1 0: Reset (100nsec)
M1 1: Enable
FM2 1: ON
M1 1: Back scan, 0: Scan
- -
- -
- -
T-8-16
8-51