Canon imageRUNNER ADVANCE 6075 Series Service Manual page 869

COPIER > ADJUST > HV-TR
P-TR-OF4 Adj of pre-trn charge crrnt ofst: Thin
Lv.2 Details To adjust the offset value of the pre-transfer charging current for thin
paper.
Set the environment (temperature and humidity), feed mode, and
pre-transfer charging current offset value in the order from left.
When the actual usage status matches to the specified environment
and feed mode, the specified offset value is added to the pre-transfer
charging target current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range Environment: 0 to 4
0: No specification, 1: Environment 1and 2, 2: Environment 3 to 5, 3:
Environment 6 and 7, 4: All environments
Feed mode: 0 to 7
0: No specification, 1: Cassette/3.5K deck 1-sided, 2: Cassette/3.5K
deck 2-sided, 3: Multi-purpose Tray 1-sided, 4: Multi-purpose Tray
2-sided, 5: Large deck 1-sided (only POD Deck Lite), 6: Large deck
2-sided (only POD Deck Lite), 7: All modes
Pre-transfer charging current offset value: -10 to 10
Unit 10 micro A
Default value 0
Related service mode COPIER> ADJUST> HV-TR> P-TR-OF1 to 3, 5 to 6
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
P-TR-OF5 Adj pre-trn charge crrnt ofst: Special 1
Lv.2 Details To adjust the offset value of the pre-transfer charging current for
special paper 1.
Set the environment (temperature and humidity), feed mode, and
pre-transfer charging current offset value in the order from left.
When the actual usage status matches to the environment and feed
speed set in this item and the paper type (special paper 1) set in
P-TR-SP1, the specified offset value is added to the pre-transfer
charging target current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range Environment: 0 to 4
0: No specification, 1: Environment 1and 2, 2: Environment 3 to 5, 3:
Environment 6 and 7, 4: All environments
Feed mode: 0 to 7
0: No specification, 1: Cassette/3.5K deck 1-sided, 2: Cassette/3.5K
deck 2-sided, 3: Multi-purpose Tray 1-sided, 4: Multi-purpose Tray
2-sided, 5: Large deck 1-sided (only POD Deck Lite), 6: Large deck
2-sided (only POD Deck Lite), 7: All modes
Pre-transfer charging current offset value: -10 to 10
Unit 10 micro A
Default value 0
Related service mode COPIER> ADJUST> HV-TR> P-TR-OF1 to 4, 6, P-TR-SP1
8-87
8-87