Canon imageRUNNER ADVANCE 6075 Series Service Manual page 898

COPIER > FUNCTION > 2D-SHADE
SHD-P1 2D shading pattern 1 output
Lv.1 Details To output pattern 1 for 2D shading.
Use case When checking 2D shading profile visually and entering manually
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> OPTION> IMG-LSR> 2D-SHADE
COPIER> FUNCTION> 2D-SHADE> SHD-P2, SHD-P3
SHD-P2 2D shading pattern 2 output
Lv.1 Details To output pattern 2 for 2D shading.
Use case When checking 2D shading profile visually and entering manually
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> OPTION> IMG-LSR> 2D-SHADE
COPIER> FUNCTION> 2D-SHADE> SHD-P1, SHD-P3
SHD-P3 2D shading pattern 3 output
Lv.1 Details To output pattern 3 for 2D shading.
Use case When checking 2D shading profile visually and entering manually
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> OPTION> IMG-LSR> 2D-SHADE
COPIER> FUNCTION> 2D-SHADE> SHD-P1, SHD-P2
2D-READ Read 2D shading ROM
Lv.1 Details To read 2D shading ROM data.
To check ROM for 2D shading, compare the calculated checksum
and checksum of ROM.
When they are matched, the checksum and Drum Lot number are
stored in the DC Controller. When they are not matched, it is judged
as an alarm.
Use case After executing initialization of Drum at Drum replacement
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During execution: ACTIVE, At normal termination: OK!, At abnormal
termination: NG!
Related service mode COPIER > DISPLAY > 2D-SHADE > 2D-STS
COPIER > OPTION > IMG-LSR > 2D-SHADE
8
Service Mode > COPIER > FUNCTION > 2D-SHADE
T-8-53
8 Service Mode > COPIER > FUNCTION > 2D-SHADE
8-116
8-116