Canon imageRUNNER ADVANCE 6075 Series Service Manual page 275

2
Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
3. When DNS settings and proxy settings are not made, touch the [Close] button to
reboot the device.
3) DNS Settings
1. Select [TCP/IP Settings] from breadcrumbs of the left columns, and then Touch it.
2. Touch the [TCP/IP Settings] > [DNS Settings] > [DNS Server Address Settings]
buttons.
2 Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
3. Set the DNS server address based on the result obtained in Information item 2 under
• Select [Primary DNS Server] and make settings.
• When the secondary DNS server is installed, select [Secondary DNS Server] and
F-2-312
4. When proxy settings are not made, touch the [Close] button to reboot the device.
F-2-313
"(2) Advance preparations", and touch the [OK] button.
make settings.
2-221
F-2-314
F-2-315
2-221