Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1179

2) Pull out the cables to the front, and connect the Signal Cable and the Power Supply Cable
to the Mirroring Board or Encryption Board.
x2
3) Install the Mirroring Board or Encryption Board.
• 4 Screws (TP; M3x6)
x4
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
4) Secure the Signal Cable and the Power Supply Cable in place using the 2 Wire Saddles at
the back of the HDD Case Unit.
5) Free the cables from the 3 Wire Saddles at the front.
F-9-388
F-9-389
9 Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
x2
9-182
F-9-390
9-182