4
Parts Replacement and Clearning > Fixing > Removing the Upper Separation Claw
3) Remove the Sub Thermistor Holder.
• 1 Screw
4) Remove the Sub Thermistor 1.
• 1 Screw
4
Parts Replacement and Clearning > Fixing > Removing the Upper Separation Claw
Removing the Upper Separation Claw
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
<Procedure>
1) Hold the Lever of the Left Guide to open the Left Guide.
2) While holding the Upper Separation Claw Retaining Spring, remove the Upper Separation
Claw.
F-4-354
F-4-355
4-193
Upper
Separation
Upper Separation
Claw
Claw Spring
F-4-356
4-193