Canon imageRUNNER ADVANCE 6075 Series Service Manual page 431

4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
CAUTION:Points to Caution when Securing the Shield Plate
Move the Shield Plate Retainer Block fully to the inside to secure with the screw.
Check that the rear Pin is fitted into the Frame hole, and then move the Shield Plate
back and forth to check that the Shield Plate is secured.
4 Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
2) Turn the Gear by hand to move the Cleaning Pad Arm to the front.
CAUTION: Points to Caution when Installing the Pre-transfer Charging Wire Cleaner
Holder
Push in the Pre-transfer Charging Wire Cleaner Holder until it is secured with the Claw.
F-4-122
4-110
F-4-123
F-4-124
4-110