Canon imageRUNNER ADVANCE 6075 Series Service Manual page 945

COPIER > OPTION > USER
MAIL-OF Mail send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of e-mail transmission.
E-mail transmission is not available by entering the address because
of no display of "E-Mail" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
IFAX-OF IFAX send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of I-Fax transmission.
IFAX transmission is not available by entering the address because
of no display of "I-Fax" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
LDAP-DEF Initial condtn set of LDAP server search
Lv.1 Details To set initial condition for search target attribute that is specified at
the time of LDAP server Details search.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5:
No registration 1 (any setting), 6: No registration 2 (any setting)
Default value 0
Related service mode COPIER > OPTION > USER > LDAP-SW
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
FREE-DSP Display/hide of charge disable screen
Lv.2 Details To set whether to display or hide the Use Charge Management
screen for switching between charge and no charge.
The hardware switch for switching charge/no charge in the Coin
Manager enables the mode in which all the services are available
for free (store manager mode) by temporarily releasing the charging
system.
Even without the hardware switch, the mode can be switched
with the software switch when it is set to display the Use Charge
Management screen in Settings/Registration.
Use case When enabling all the services to be provided for free by temporarily
releasing the charging system
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Management Settings > Charge Management > Use Charge
Management
CLR-TIM Set of HDD Encry Kit data delete timing
Lv.2 Details To set the timing to completely delete the data when HDD Encryption
Kit is used.
Selecting 0 may reduce the job processing speed because page
data that has been already processed is deleted while the other job
is in process, causing overload to CPU and HDD access.
Selecting 1 improves the job processing speed because the process
is executed after a job is completed.
Use case Upon request to improve the job processing speed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: During job process, 1: After the job is completed
Default value 0
HDCR-DSW Dis/hide of HDD complete delete ON/OFF
Lv.1 Details To set whether to display or hide "Hard Disk Data Complete Deletion"
in user mode.
With this setting, HDD data complete deletion function is available
with ON/OFF button on the screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Management Settings > Data Management > HDD Data Complete
Deletion > Hard Disk Data Complete Deletion
8-163
8-163