Main Controller; Removing Main Controller Pcb 1 - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Main Controller > Removing Main Controller PCB 1

Main Controller

Removing Main Controller PCB 1

<Preparation>
1. Remove the Box Cover (Right).
1-1) Push [A] part to open the HDD Cover.
[A]
1-2) Remove the Main Controller Right Cover Unit.
• 1 Screw
4 Parts Replacement and Clearning > Main Controller > Removing Main Controller PCB 1
<Procedure>
1) Disconnect the Connector (USB Cable and the Control Panel Cable) to remove the Main
Controller PCB 1 Unit in the direction of the arrow.
2) Remove the Flash PCB, the TPM PCB and the 2 Memory Boards.
• 2 Screws
F-4-41
F-4-42
x2
Control Panel Cable
USB Cable
Main Controller PCB 1
Handle
x2
4-81
F-4-43
F-4-44
4-81