Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1063

30) Peel off the 4 blindfold seal at the rear side of the host machine, then fit the reuse band
of the AC cable and 3 wire saddles as shown.
Wire the AC cable as shown in the figure and joint the AC connector to the power cord
mount of the heater.
x1
9
Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-A1)
CAUTION:
To ensure smooth connection of the heater power connectors,
explain to the user that any obstacle that can prevent the paper deck from opening
should not be placed in the hatched area.
[1]: Host machine [2]: Paper deck [A]: Front
x3
x3
F-9-149
9 Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-A1)
[1]
[A] [2]
F-9-150
9-66
9-66