Custom - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ CUSTOM

COPIER > OPTION > CUSTOM
TEMP-TBL Set fixing control temp table: Plain
Lv.1 Details To set the control temperature table of the Fixing Roller for 64 to 90g/
m2 size paper.
Use case When alleviating the curl
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -5 to 2
-5 to -1: -5 degC, 0: 0 degC, 1 to 2: +5 degC
Default value 0
CCD-TYPE Setting of CCD Unit type
Lv.2 Details To set the CCD Unit type installed in the Reader to the backup area
in the controller.
Controller switches the image processing table according to the
setting value.
Use case When changing the CCD Unit type
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Initial type, 1: Improved type
Default value 0
Supplement/memo If the CCD Unit is changed after factory shipment, the Reader cannot
identify the type.
FACT-DEF Set batch chng of factory setting values
Lv.2 Details To set the batch change of factory setting values for customization.
Display/adj/set range 0 to 1
Default value 0
MAILYEAR Set auto add to e-mail Subject/File name
Lv.2 Details To set whether to add date, time and split number automatically to
the end of a character string of e-mail Subject/File name.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Following the current setting, 1: Adding
Default value 0
8
Service Mode > COPIER > OPTION > CUSTOM
8 Service Mode > COPIER > OPTION > CUSTOM
COPIER > OPTION > CUSTOM
BOX-BKUP Set to allow Inbox backup data restore
Lv.1 Details To set whether to permit restoration of Inbox backup data.
Machine subject to restoration can be selected from either the same
model or the next model.
When restoration is completed normally, the setting value is returned
to 0.
Use case At replacement, permit to restore backup data of other model (some
models).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Permit restoration only from own device to own device (same
model only)
1: Permit restoration only from old device to new device (next model
only)
Default value 0
SCANTYPE Switch of ADF + Reader
Lv.1 Details To switch to a different type ADF + Reader Unit.
Use case At installation
Display/adj/set range 0 to 1
0: Reverse Duplex ADF + Reader, 1: 1-Path Duplex ADF + Reader
Default value 0
PDLEVCT1 Set event skipping at continuous PDL job
Lv.2 Details To set event skipping at continuous PDL job.
During continuous operation, processing performance may be
decreased due to other events generated by the event in operation.
In this case, decrease of processing performance can be prevented
by skipping the amount of event.
Processing performance: No event skipping < Subject of skipping 1
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No event skipping, 1: Subject of skipping 1
Default value 1
ABK-TOOL Allow access from address book mntc tool
Lv.1 Details To set whether to accept import from the address book maintenance
tool.
Use case When executing import from the address book maintenance tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Supplement/memo Address book maintenance tool: Tool provided from CMJ.
8-152
8-152