1) Connect the Signal Cable and the Power Cable of the host machine to the Mirroring Board
or Encryption Board.
x2
2) Install the Mirroring Board or Encryption Board.
• 4 Screws (TP; M3x6)
x4
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
3) Install the HDD Case Unit.
• 2 Hooks
• 2 Bosses
• 2 Screws (Use the screws removed in "Removing the HDD and HDD Case Unit" step 11).)
NOTE:
Be careful not to catch the plate of the host machine with the Wire Saddles on the rear
side of the HDD Case Unit, otherwise the installation work may become difficult.
F-9-508
F-9-509
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
x2
引掛け
Hook
9-250
Hook
Boss
ボス
F-9-510
9-250