11)
Plug the USB cable into the connector.
12)
Return the Upper Left Cover.
CAUTION:
Be careful not to trap the USB Cable.
13)
Return the Bottle Regulation Rail.
14)
Close the Toner Exchange Cover.
9
Installation > Installation > Setting the Environment Heater Switch
Setting the Environment Heater Switch
1) Check that the Leakage Breaker is ON.
2) Turn ON the Environment Heater Switch and the Cassette Heater Switch in accordance
with the installation environment.
Set the environment switches in accordance with the installation environment.
In the case of high humidity environment, turn ON the Environment Switch. (The Drum
Heater is turned ON regardless of the main switch status).
F-9-40
9
Installation > Installation > Setting the Environment Heater Switch
9-20
Environment
Cassette Heater
Switch
Switch
Leakage Breaker
F-9-41
9-20