Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1041

6) Remove the Delivery Cover.
• 5 Stepped Screws (The 3 removed Stepped Screws will be used in step 10).)
• 2 Protrusions
x5
7) Remove the 2 screws, and install the Shift Delivery Support Base (1) using the removed
screws.
x2
9
Installation > Shift Tray-E1 > Installation Procedure
Protrusion
F-9-87
x2
F-9-88
9 Installation > Shift Tray-E1 > Installation Procedure
8) Remove the screw, and install the Shift Delivery Support Base (2) using the removed screw
and the screw included in the package.
• 1 Screw (RS Tightening; M4x8)
CAUTION:
The 2 screws used are different in length. Be sure to install them to the correct
positions.
9) Install the Shift Tray Support Base.
• 2 Bosses
• 2 Screws (RS Tightening; M4x8)
x2
removed screw
x2
M4x10
screw included in the package
M4x8
Boss
Boss
F-9-90
9-44
F-9-89
9-44