Canon imageRUNNER ADVANCE 6075 Series Service Manual page 888

COPIER > FUNCTION > CLEAR
ADRS-BK Clear of address book
Lv.1 Details To clear the address book data.
Use case When clearing the address book data
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The address book data is cleared after the main power switch is
turned OFF/ON.
CNT-MCON Clear of Main Controller service counter
Lv.1 Details To clear the service counter counted by the Main Controller PCB.
Use case When clearing the service counter counted by the Main Controller
PCB
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> COUNTER
Supplement/memo See COUNTER for the target counter.
CNT-DCON Clear of DC Controller service counter
Lv.1 Details To clear the service counter (FIN-STPR, FIN-PDDL, SADDLE, STPL)
counted by the DC Controller PCB.
Use case When clearing the service counter counted by the DC Controller
PCB
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> COUNTER> DRBL-2> FIN-STPR, FIN-PDDL, SADDLE,
STPL
OPTION Clear of service mode setting VL(OPTION)
Lv.1 Details To return the value specified in service mode (OPTION) to the default
value (value at the time of RAM clear).
Adj/set/operate method Select the item, and then press OK key.
Caution - Output the service mode setting values by P-PRINT before
execution. After execution, enter necessary setting values.
- This item is executed for the data on the Main Controller PCB, DC
Controller PCB and Reader Controller PCB.
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
MMI Clear of user mode setting value
Lv.1 Details To clear the user mode setting values (excluding values for Control
Panel, common settings, and FAX).
- Common Settings
- Timer Settings
- Adjustment/Cleaning
- Report Settings
- System Settings
- Copy Settings
- Communications Settings
- Printer Settings
Use case When clearing various setting values of user mode
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The setting value is cleared after the main power switch is turned
OFF/ON.
8
Service Mode > COPIER > FUNCTION > CLEAR
8 Service Mode > COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > CLEAR
MN-CON RAM clear of MNCON PCB SRAM Board
Lv.1 Details To clear the RAM data of the Main Controller PCB SRAM Board.
All data on the SRAM Board is initialized.
Use case When clearing the RAM data of the Main Controller PCB SRAM
Board
Adj/set/operate method 1) Select the item, and then press OK key.
The machine is automatically rebooted.
2) Turn OFF/ON the main power switch.
Caution - Inform the user that all images in Inbox will be deleted and get
approval for it.
- Since the file management information is initialized, images on the
HDD cannot be read.
- Output the service mode setting values by P-PRINT before
execution. After execution, enter necessary setting values.
- The RAM data is cleared after the main power switch is turned
OFF/ON.
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
CARD Clear of card ID-related data
Lv.1 Details To clear the data related to the card ID (department).
Use case When clearing the data related to the card ID
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The value is cleared after the main power switch is turned OFF/ON.
ALARM Clear of alarm log
Lv.1 Details To clear alarm log.
Use case When clearing alarm log
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The alarm log is cleared after the main power switch is turned OFF/
ON.
8-106
8-106