Show Frrp - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage This command places you into the resilient ring protocol. After executing this
Information command, the command line prompt changes to conf-frrp.

show frrp

Display the resilient ring protocol configuration.
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id
summary
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
788
Description
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced
Enter the ring identification number. The range is from 1 to
255
(OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Description
Introduced on the S6000–ON.
Force10 Resilient Ring Protocol (FRRP)