Dell Z9500 Command Reference Manual page 789

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Executing this command without the optional ring-id command clears the
Information
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command executes. This command clears
the following counters:
•
•
•
Usage Executing this command without the optional ring-id command clears the
Information statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command is executed. This command
clears the following counters:
•
•
•
Example
Dell#show frrp summary
(Summary)
Ring-ID State Mode
----------------------------------------------
2
31
50
Dell#
Example (1)
Dell#show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
Primary : TenGigabitEthernet 1/16 State: Forwarding
Secondary: Port-channel 100 State: Blocking
Control Vlan: 1
Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150
msec
Ring Master's MAC Address is 00:01:e8:13:a3:19
Topology Change Statistics: Tx:110 Rx:45
Hello Statistics: Tx:13028 Rx:12348
Number of state Changes: 34
Member Vlans: 1000-1009
Dell#
Force10 Resilient Ring Protocol (FRRP)
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
Ctrl_Vlan Member_Vlans
UP Master
UP Transit
Down Transit
2 11-20, 25,27-30
31 40-41
50 32
789