Rmon Collection History - Dell S6100 Configuration Manual

Version
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.
Syntax rmon collection history {controlEntry integer} [owner name] [buckets number]
[interval seconds]
To remove a specified RMON history group of statistics collection, use the no rmon collection history
{controlEntry integer} command.
Parameters
controlEntry integer
owner name
buckets number
interval seconds
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
1348 Remote Monitoring (RMON)
Description
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword controlEntry to specify the RMON group of statistics using a
value. Then enter an integer value from 1 to 65535 that identifies the RMON group of
statistics. The integer value must be a unique index in the RMON history table.
(OPTIONAL) Enter the keyword owner then the owner name to record the owner of the
RMON group of statistics.
(OPTIONAL) Enter the keyword buckets then the number of buckets for the RMON
collection history group of statistics. The bucket range is from 1 to 1000. The default is 50.
(OPTIONAL) Enter the keyword interval then the number of seconds in each polling
cycle. The range is from 5 to 3600 seconds. The default is 1800 seconds.
Description
Introduced on the S6100-ON.