Display Ospf Peer; Display Ospf Request-Queue - 3Com 8807 Command Reference Manual

432 C 25: OSPF C
HAPTER

display ospf peer

display ospf
request-queue
C
ONFIGURATION OMMANDS
Table 62 Description of the fields of the display ospf nexthop command
Field Description
Intf Name The outgoing interface to the next hop
Syntax
display ospf [ process-id ] peer [ brief ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf peer command to view information about OSPF peers.
Use the display ospf peer brief command to view the brief information of every
peer in OSPF, mainly the numbers of peers at all states in every area.
Example
# View the neighbor brief information of OSPF.
<SW8800> display ospf peer brief
OSPF Process 1 with Router ID 85.1.1.1
Virtual Link:
Router ID
85.1.1.2
Table 63 Description of the fields of the display ospf peer brief command
Field Description
Router ID Router ID of neighbor router
Address Address of the interface through which the neighbor router communicates with
the local router
Pri Priority
Interface Interface address of the network segment
State State information
Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Neighbor Brief Information
Address Pri
63.56.1.1 0
Interface
Vlan-interface561
State
Down