Display Ospf Request-Queue - 3Com 5500-EI PWR Reference Manual

Field
Loading
Full
Total

display ospf request-queue

Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf request-queue command to display the information about the OSPF
request-queue.
Examples
# Display the information about the OSPF request-queue.
<Sysname> display ospf request-queue
The Router's Neighbors is
RouterID: 1.1.1.1
Interface: 1.1.1.3
LSID:1.1.1.3
Table 4-13 Description on the fields of the display ospf request-queue command
Field
RouterID
Address
Interface
Area
LSID
AdvRouter
Sequence
Age
In this state, OSPF router requests neighbor routers based on the
updated link state information from neighbor routers and its expired
information, and waits for response from neighbor routers
It indicates that database synchronization between the routers that have
established neighbor relation has been completed, and their link state
databases have been consistent
Total number of neighbors in various states
Address: 1.1.1.1
Area: 0.0.0.0
AdvRouter:1.1.1.3 Sequence:80000017
ID of a neighbor router
IP address of the interface on a neighbor router
IP address of the interface on the local router
Area number of OSPF
Link state ID in the LSA
Router ID of the router that advertised the LSA
Sequence number of the LSA, used to discover old and repeated LSAs
Age of the LSA
4-25
Description
Age:35
Description