Display Ospf Nexthop - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Table 3-8 Description on the fields of the display ospf lsdb ase command

3.1.19 display ospf nexthop

Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf nexthop command to display the OSPF next-hop information.
Example
# Display the OSPF next-hop information.
<3Com> display ospf nexthop
Field
type
ls id
adv rtr
ls age
len
seq#
chksum
Options
Net mask
E type
Forwarding Address
Tag
OSPF Process 1 with Router ID 2.2.2.2
3-24
Chapter 3 OSPF Configuration Commands
Description
Type of the LSA
Link state ID of the LSA
Router ID of the router that
advertises the LSA
Age of the LSA
Length of the LSA
Sequence number of the
LSA
Checksum of the LSA
Options of the LSA
Network mask
Type of external route
Forwarding address
Tag