Display Ospf Nexthop - 3Com 5500G-EI Command Reference Manual

display ospf nexthop

seq#: 80000001
chksum: 0xfcaf
Options: (DC)
Net mask: 255.255.0.0
Tos 0 metric:1
E type:2
Forwarding Address:0.0.0.0
Tag: 1
Table 32 Output Description of the
Field Description
type Type of the LSA
ls id Link state ID of the LSA
adv rtr Router ID of the router originating the LSA
ls age Age of the LSA
len Length of the LSA
Seq# Sequence number of the LSA
chksum Checksum of the LSA
Options Options of the LSA
Net mask Network mask
E type Type of external route
Forwarding Address Forwarding address
Tag Tag
Syntax
process-id
display ospf [
View
All Views
Parameter
Enter the process ID of OSPF, ranging from 1 to 65535. The command
process-id
is applied to all current OSPF processes if you do not specify a process ID.
Description
Use the
display ospf nexthop
next-hop.
Example
To display the OSPF next-hop information, enter the following:
<SW5500>display ospf nexthop
OSPF Process 1 with Router ID 1.1.1.1
The information displays in the following format:
Address Type
--------------------------------------------------------------------
202.38.160.1 Direct
202.38.160.2 Neighbor
OSPF Configuration Commands
display ospf lsdb ase
] nexthop
command to view the information about the
Refcount Intf Addr
3 202.38.160.1
1 202.38.160.1
195
Command
Intf Name
Vlan-interface2
Vlan-interface2