display ospf cumulative
Table 27 Output Description of the
Timers
OSPF timers:
■
■
■
■
■
Syntax
process-id
display ospf [
View
All Views
Parameter
Enter process ID of OSPF, ranging from 1 to 65535. The command is
process-id
applied to all current OSPF processes if you do not specify a process ID.
Description
Use the
display ospf cumulative
information.
Example
To display the OSPF cumulative information, enter the following:
<SW5500>display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
The information displays in the following format:
Cumulations
IO Statistics
Type
Hello
DB Description
Link-State Req
Link-State Update
Link-State Ack
ASE: 1 Checksum Sum:
LSAs originated by this router
Router: 50
SumNet: 40SumASB: 2
LSAs Originated: 92
Area 0.0.00.0:
Neighbors: 1
Interfaces: 1
Spf: 54
Checksum Sum F020
rtr: 2 net: 0 sumasb: 0 sumnet: 1
Area 0.0.0.1:
Neighbors: 0
Interfaces: 1
Spf: 19
Checksum Sum 14EAD
rtr: 1 net: 0sumasb: 1sumnet: 1
Routing Table:
Intra Area: 2
Inter Area: 0ASE: 1
display ospf brief
Hello — Interval of hello packets
Dead — Interval of dead neighbors
Poll — Interval of poll
Retransmit — Interval of retransmitting LSAs
Transmit delay — Delay time of transmitting LSAs
] cumulative
command to view the OSPF cumulative
Input
Output
225
437
78
86
18
18
48
53
25
21
FCAF
LSAs Received: 33
OSPF Configuration Commands
Command
189