Display Ospf Brief - 3Com 8807 Command Reference Manual

424 C 25: OSPF C
HAPTER

display ospf brief

C
ONFIGURATION OMMANDS
Table 55 Description of the fields of the display ospf asbr-summary command
Field
mask Mask
tag Tag
Status information, including two values:
DoNotAdvertise
status
Advertise
Syntax
display ospf [ process-id ] brief
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf brief command to view the main summary of OSPF.
Example
# Display the OSPF summary.
<SW8800> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
OSPF Protocol Information
RouterID: 10.110.95.189
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 16
Area Count: 1
Area 0.0.0.0:
Authtype: none
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 56 Description of the fields of the display ospf brief command
Field
RouterID
Border Router
spf-schedule-interval
Authtype
Description
Border Router: Area AS
Nssa Area Count: 0
Flags: <>
Type: Broadcast
Router ID of the router
Border routers for connection to the area, including autonomous
system border router (ASBR) and area border router (ABR)
Interval of SPF schedule in seconds
Authentication type of OSPF
The summary routing information to the
network segment will not be advertised
The summary routing information to the
network segment will be advertised
Description