How To Use Diagnostics - GE Senographe DS Manual

GE Healthcare
Revision 1
7.

HOW TO USE DIAGNOSTICS

Click the Diagnostics button
different subsystems and communication links of the Senographe system.
Specific instructions are given for each diagnostic test, and results are displayed at the end of each test.
! Notice:
After running diagnostics, always reboot the system before handing it back to the customer, to en-
sure correct configuration. This is especially important after tests which require disconnection of
communications links.
ILLUSTRATION 14 - DIAGNOSTICS ON V1/V2 CONTROL STATIONS
S2100D How To.fm
Service Information and Procedures Class A 2385072-16-8EN
in the Service Desktop navigation bar to launch diagnostic tests for the
Page no. 127
Senographe DS
Senographe Operations - How to...
Chapter 3