Options During A Query Call; Splitting - Auerswald COMpact 3000 analog Operating Manual

On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the telephone).

Options during a Query Call

The following actions are possible during a query call:

Splitting

You can use at the splitting function to switch between your two communication partners.
Terminating One of the Two Calls
When you end a query call and would like to continue talking with one of the communication
partners, you can specifically end the call with the other communication partner separately. Of
course, one of your communication partners can simply hang up so that you can continue
talking with the other communication partner alone.
Connecting Both Communication Partners
If you would like to let your communication partners speak with each other, you can connect
them.
Initiating a Query Call to Third Subscriber
If you want to connect a further communication partner during a query call, you can initiate a
third call for this purpose. Both the first and second communication partner will be on hold in
the background during this time.
Splitting
Requirements:
– Initiated query call
During a query call, proceed as described in the following.
1. Press the Flash key (when using a telephone with DTMF dialling) or the Query key
(when using an ISDN telephone).
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Telephoning
Query Calls
Options during a Query Call
115