Auerswald COMpact 3000 analog Operating Manual page 366

Settings
Internal Telephone Numbers
Creating Line Groups
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Internal numbers > Line groups.
2. If necessary, change one of the internal telephone numbers displayed or enter a new
internal number in the From entry field under Telephone numbers. The following
entries are possible:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
The telephone numbers 70, 80, 87, 701-706, 801-806, 875-879 and 8750-
8799 cannot be freely allocated. They are required for internal PBX use.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers with more digits. For
example, if the telephone number 12 is assigned, the telephone numbers
120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone number plan.
3. Enter a name for identification purposes in the Name entry field. The following entries
are possible:
Up to 16 digits
Digits and characters
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the telephone number.
4. Click .
Note: The line group subscribers are assigned on the page PROPERTIES >
Group members. Click
5. Repeat step 2 to 4 to enter additional telephone numbers.
Further steps:
366
10 to 9999
to switch directly to this page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020