Configuring The Http Proxy - Auerswald COMpact 3000 analog Operating Manual

Settings
Internet Access

Configuring the HTTP Proxy

Configuring the HTTP Proxy
An HTTP proxy is a proxy for the HTTP protocol, over which Internet sites are called or files
downloaded.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page CONFIGURATION > Server configuration > Network.
2. Select or clear the HTTP proxy check box under HTTP proxy configuration.
Enables the HTTP proxy.
Disables the HTTP proxy. (No other action is required.)
3. In the IP address or URL entry field under HTTP proxy configuration, enter the
HTTP proxy. The following entries are possible:
IP address with a range of 0 to 255 (example: 123.123.123.123)
URL (example: www.proxyserver.de)
4. In the Port entry field under HTTP proxy configuration, enter the associated port
number (port). The following entries are possible:
1 to 65535
5. Select or clear the Proxy authorisation check box under HTTP proxy configu-
ration.
Enables proxy authorisation.
Disables proxy authorisation. (No other action is required.)
6. Enter the user name for the authorisation into the HTTP proxy in the User name entry
field under HTTP proxy configuration.
7. Enter the password for the authorisation into the HTTP proxy in the Password entry
field under HTTP proxy configuration.
Further steps:
– Save your settings before you leave the page.
352
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020