Multi-Path Call Forwarding; Switching Multi-Path Call Forwarding On/Off - Auerswald COMpact 3000 analog Operating Manual

Multi-path Call Forwarding

Multi-path call forwarding is used to signal external calls, in addition to call distribution for an
internal or an external telephone number, e.g., on a mobile phone. Multi-path call forwarding is
also executed if the "main telephone number" is, for example, busy. It is not executed when call
forwarding for external numbers is enabled.

Switching Multi-path Call Forwarding On/Off

Switching this on/off can be done as follows:
• Separately for external telephone numbers
• Separately for configurations
• Via the configuration manager
• Using a character string on the internal telephone
Switching Multi-path Call Forwarding On/Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– For external destination numbers: At least two call channels
1. Open the page CONFIGURATION > Call distribution > Create call distribution.
All of the separate external telephone numbers entered and the corresponding group
phone numbers (call distribution groups) are displayed horizontally across the table.
Note: Click
telephone numbers. Click
2. In the Multi-path Call Forwarding entry field, enter the destination number. The
following entries are possible:
Up to 20 digits
Exchange line access number + external phone number
Short-code number
Internal number of the individual telephone
Internal number of the line group
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
to scroll horizontally across the table to display other
to scroll back again.
Multi-path Call Forwarding
Switching Multi-path Call Forwarding On/Off
Functions
277