Configuring The Fax Switch - Auerswald COMpact 3000 analog Operating Manual

Settings
Call Distribution

Configuring the Fax Switch

4. Dial *900#.
Configuring the Fax Switch
If the fax switch is enabled, the PBX transfers external calls actively or passively to an internal
fax machine or a fax box.
• active fax switch: The PBX automatically accepts each external call. It uses the dial tones
to try to determine whether the incoming call is from a fax machine. If the corresponding dial
tones are identified within the detection duration of six seconds, the call is transferred to the
internal destination (fax machine or fax box). If the dial tone cannot be identified within this
time frame, normal call distribution is put into effect.
• passive fax switch: External calls are signaled on the internal subscribers that are
selected in call distribution. If a user accepts the call and then hangs up again within three
seconds, the PBX transfers the call to the internal destination (fax machine or fax box).
• active/passive fax switch: Active and passive are switched in succession. This allows the
call to be automatically transferred from the PBX to the internal destination within the
detection duration of six seconds (fax machine or fax box) or transferred by a user who
accepts the call and hangs up again within three seconds.
Configuration can be carried out as follows:
• Separately for configurations
• Via the configuration manager
Requirements:
– External analogue port (only COMpact 3000 analogue)
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Call distribution > Create call distribution.
All of the separate external telephone numbers entered and the corresponding group
phone numbers (call distribution groups) are displayed horizontally across the table.
Note: Click
telephone numbers. Click
2. In the first Fax function list field, select one of the following options:
466
to scroll horizontally across the table to display other
to scroll back again.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020