Selecting An Announcement For The Voice Mailbox - Auerswald COMpact 3000 analog Operating Manual

Voice Mailboxes and Fax Boxes
Voice Mailbox

Selecting an Announcement for the Voice Mailbox

#*21#: Enables the voice mailbox via all configurations.
##21#: Disables the voice mailbox via all configurations.
Note: You can also enable or disable the voice mailbox using voice
commands. To configure this, call the voice mailbox internally.
Switching the Voice Mailbox On via an External Telephone
Requirements:
– An SD card inserted in the SD card slot or a USB memory stick inserted in the USB port
– DTMF dialling support on the external telephone
– Imported language file (*.fs)
– Knowledge of the PIN for accessing the corresponding voice mailbox remotely
– Disabled voice mailbox
1. Call the voice mailbox and keep ringing for approximately one minute.
The voice mailbox takes the call. You will be prompted to enter the 6-digit PIN for
remote access and then the pound sign.
2. Enter the PIN for remote query
You are in the menu for remote access.
3. Dial *11.
The voice mailbox is enabled.
Further steps:
– If required, execute remote access.
Selecting an Announcement for the Voice Mailbox
For each enabled voice mailbox, one of ten possible announcements can be selected. If no
announcement is selected, the default announcement is automatically played back.
The selection can be carried out as follows:
• Via the configuration manager
158
and dial #.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020