Configuring The Pbx Remotely Via The Internet (Without Ara Server) - Auerswald COMpact 3000 analog Operating Manual

10. Log out from the configuration manager.
11. Click Disconnect in the user interface of the ARA server.

Configuring the PBX Remotely via the Internet (without ARA server)

Requirements:
– Existing Internet connection between the computer and the PBX (DSL)
– Permanent external IP address, or the use of VPN or DynDNS
– A router configured for this purpose
– Knowledge of user name and password for the configuration manager
– Knowledge of the configured port of the web server
Note:
Refer to the operating manual of your router.
The access is possible via
Important: An internal network is usually protected from actions from the
outside by, for example, a firewall integrated in the router. For questions
about configuring your firewall, contact the system administrator responsible
for this topic.
1. Start a browser (for example, Mozilla Firefox).
2. Enter http://
then the port, into the address field of the browser.
The login window opens.
3. Enter your user name and password.
4. Click Log in.
The configuration manager opens.
5. Make the desired changes.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
http:
and the external IP address for the PBX as well as the
Remote Configuration and Alternative Connection Options
Configuring the PBX Remotely via the Internet (without ARA server)
and via https: (encrypted access).
Service and Maintenance
: character, and
535