Creating A Pbx Image - Auerswald COMpact 3000 analog Operating Manual

– At least one logged-in user
1. Open the page SERVICE > Service data > Logged-in users.
2. Click Log-out in the line of the corresponding user.
The user is logged out.

Creating a PBX Image

If the PBX exhibits a malfunction which is not caused by incorrect operation or external influ-
ences, a PBX unit image can be used to diagnose the malfunction.
Important:
Observe the following legal notes before saving the service data.
The service data include, amongst others, the following legally especially
protected components:
- Configuration of the PBX
- Names of internal subscribers
- Passwords of PBX, subscribers, VoIP accounts and VoIP subscribers
- The telephone book of the PBX
- Connection data sets with destination, source, and time information of a
telecommunication connection
Before the service data are being saved, all subscribers to the PBX must be
informed that these contents will be forwarded. They must also be informed
about who will use the data received.
If you want to make the service data available to your specialised dealer or
to the manufacturer for error analysis, you must make sure that the legal
requirements are fulfilled.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Service and Maintenance
Service Data
Creating a PBX Image
565