Auerswald COMpact 3000 analog Operating Manual page 432

Settings
VoIP
Configuring the Number Presentation (Outgoing)
Note:
The PBX checks whether and which of the telephone numbers entered
should be transmitted (CONFIGURATION > Telephone number
presentation).
The telephone number transmitted is automatically converted into the
selected format. If your own telephone numbers have been entered into the
PBX without area codes, the local area codes are used during conversion
(CONFIGURATION > External numbers > Location).
• Number presentation suppression: Telephone number suppression/restriction by the
provider with or without display text.
Configuration can be carried out as follows:
• Separately for VoIP providers
• Via the configuration manager
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorisation
– Configured external telephone numbers
– Number presentation suppression: Support of the service attribute number presentation
suppression by the VoIP provider
– Number presentation suppression: Number presentation suppression enabled for the
subscriber
1. Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2. Click in the line of the corresponding VoIP provider.
The Provider configuration opens.
3. Open the page Provider configuration > Number presentation (outgoing).
4. Under Format of the dialled telephone number, select one of the following options:
432
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020