Auerswald COMpact 3000 analog Operating Manual page 244

Functions
Configuration Switchover
Copying Configurations
Copying can be carried out as follows:
• Via the configuration manager
Copying a Complete Configuration
Requirements:
– Configuration manager, opened with sufficient authorisation
– At least two configured configurations
– Expert view (click
1. Open the page FUNCTIONS > Configurations > Create configurations.
2. Click Copy configuration.
3. In the Copy configuration from list field, select the configuration which contains
settings to be copied.
4. In the to list field, select the configuration to which the settings should be copied.
5. Click Copy configuration.
6. Click Next.
Copying Parts of the Configuration
Requirements:
– Configuration manager, opened with sufficient authorisation
– At least two configured configurations
– Expert view (click
1. Open one of the following pages:
• PROPERTIES > Internal subscribers > Subscriber properties for the parts
exchange line authorisation, do-not-disturb, baby/senior call, call deblocker, call
restrictor
• CONFIGURATION > Call distribution > Create call distribution for the parts
Busy on Busy, multi-path call forwarding, call distribution
244
)
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020