Release The Pbx For Remote Configuration - Auerswald COMpact 3000 analog Operating Manual

Service and Maintenance
Remote Configuration and Alternative Connection Options

Release the PBX for Remote Configuration

4. Click Network and Sharing Center.
5. Click Set up a new connection or network.
6. Click Set up a dial-up connection and click Next.
7. Depending on the desired configuration to be made, proceed as described in the
following.
• For configuration via the internal S
internal CAPI dial-in access number on the PBX.
• For remote configuration via the external S
enter the remote switching number (including local area code and exchange line
access number) on the PBX.
8. Depending on the PIN available, proceed as described in the following.
• For an external PIN: Under User name, enter
enter the external PIN on the PBX.
• For an admin PIN: Under User name, enter
the admin PIN on the PBX.
• For a sub-admin PIN: Under User name, enter the internal telephone number of
a sub-admin, and under Password, enter the associated sub-admin PIN.
9. Under Connection name, enter any connection name, for example,
[customer name]
10. Click Close.
Release the PBX for Remote Configuration
Releasing can be carried out as follows:
• Using a character string on the internal telephone
1. Pick up the receiver.
2. Dial ##8.
3. Enter the user PIN or the sub-admin PIN.
4. Dial *91#.
552
port: Under Dial-up phone number, enter the
0
and click Connect.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port: Under Dial-up phone number,
0
external and under Password,
admin and under Password, enter
PBX +