Auerswald COMpact 3000 analog Operating Manual page 321

Note: On activated holidays, you can enable the wake-up call for a Sunday
instead using the wake-up call for that weekday.
5. Select or clear the Always check box.
Enables recurring wake-up.
Enables a one-time wake-up. Once the wake-up call has been carried out, it is
deleted.
6. Select the Activated check box.
Enables the wake-up call in question.
Further steps:
– Save your settings before you leave the page.
Switching Wake-up Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Entered wake-up time and wake-up enabled for the subscriber
1. Open the page PROPERTIES > Internal subscribers > Wake-up times.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Clear the Activated check box for the wake-up call in question.
Disables the wake-up call in question.
Note: The settings for the wake-up call are not deleted by switching off the
function. To delete all of the settings for the wake-up call, the entire entry
must be deleted.
Further steps:
– Save your settings before you leave the page.
Entering and Enabling a Wake-up Time via the Internal Telephone
Requirements:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Functions
Wake-up Functions
Switching Wake-up On/Off
321