Auerswald COMpact 3000 analog Operating Manual page 47

COMpact 3000 ISDN: RJ-45 socket (external S
ISDN connection (NT)
COMpact 3000 analogue: RJ-11 socket (external analogue port) for the
connection to an analogue connection
COMpact 2a/b Module Overview
The figure below shows the optionally available COMpact 2a/b module.
A Four terminal clamps (internal a/b port 5-6) for the connection of analogue end
devices, two adjoining terminal clamps per port
B Connector for the connection to the basic unit
Overview COMpact S
The figure below shows the optionally available COMpact S
A RJ-45 socket (external S
B Four external terminal clamps (internal S
devices
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Module
0
port) for the direct connection of ISDN end devices
0
Installation and Commissioning
Overview of the Connections and Other Device Components
port) for the connection to an
0
module.
0
port) for the connection of ISDN end
0
Preparation
47