Overview Of Internal Telephone Numbers; Configuring The Size Of The Jitter Buffer For Voip Subscribers - Auerswald COMpact 3000 analog Operating Manual

Settings
Internal Telephone Numbers

Overview of Internal Telephone Numbers

Note:
The overview can be opened in the configuration manager by selecting
Groups in the list field next to
click Close.
The overview can be printed by clicking Print.
Overview of Internal Telephone Numbers
The telephone number plan shows all of the internal telephone numbers already created. In
addition, any additional numbers are displayed that have been taken from the internal
telephone number plan (e.g., exchange line access number on the PBX).
Note:
The telephone number plan can be opened in the configuration manager by
selecting Telephone number plan in the list field next to
. To close the overview, click Close.
The overview can be printed by clicking Print.

Configuring the Size of the Jitter Buffer for VoIP Subscribers

RTP packets can be cached in the jitter buffer for a defined time period. They will be transfered
continuously from there to the receiver. Delays in the transmission and loss of packets can be
compensated that way. The jitter buffer can be configured separately for subscribers and VoIP
providers.
Configuration can be carried out as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– VoIP channels (COMpact 3000 VoIP or VoIP channels purchased and activated in the
Upgrade Center)
– Configuration manager, opened with sufficient authorisation
368
and then clicking
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
. To close the overview,
and then clicking