Switching Between Standard And Expert Views; Using The Configuration Wizard - Auerswald COMpact 3000 analog Operating Manual

Basic Knowledge Configuration Manager
Configuration Manager

Switching Between Standard and Expert Views

Switching Between Standard and Expert Views
For the configuration manager, there are two different views:
• Standard view: Enables a basic functional configuration on the PBX.
Note: In the standard view, a button with
expert view.
• Expert view: Adds topics to the standard view that should only be configured by those with
the corresponding knowledge.
Note:
The additional topics are highlighted via a shading (
In the expert view, a button with
view. In addition, Expert view is visible next to the PBX name at the top.
Changes can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
• Click the corresponding letter key:
Switches to the expert view.
Switches to the standard view.

Using the Configuration Wizard

The configuration wizard automatically goes through all of the pages in the configuration
manager that are required for a quick setup on the PBX (e.g., for the initial configuration).
It can be used as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
90
is available for switching to the standard
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
is available for switching to the
).