Do-Not-Disturb; Switching The Do-Not-Disturb Function On/Off - Auerswald COMpact 3000 analog Operating Manual

Do-not-disturb

The do-not-disturb function offers the option of blocking internal and external calls as well as
blocking group calls on a specific telephone. A caller hears only a busy signal. An internal
subscriber can reach a telephone with call protection in an emergency using a priority call.
The do-not-disturb function has no influence on outgoing calls, callbacks, wake-up calls or
InterCom calls.

Switching the Do-not-Disturb Function On/Off

Switching this on/off can be done as follows:
• Separately for subscribers
• Separately for configurations
• Via the configuration manager
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Switching Do-not-Disturb On/Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
User settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Do-not-Disturb check box.
Enables the do-not-disturb function.
Disables the do-not-disturb function.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Switching the Do-not-Disturb Function On/Off
Functions
Do-not-disturb
203