Auerswald COMpact 3000 analog Operating Manual page 517

2. Restart the PBX via the configuration manager or by pressing a button.
The "Power" LED lights up/flashes in red and orange for up to two minutes.
If the "Power" LED lights up green again, the restart is completed. The PBX runs with
the firmware saved on the SD card.
Note: If the "Power" LED remains continuously lit in red, an error has
occurred. Please contact your dealer or the manufacturer directly.
Further steps:
– Carry out a firmware update back to a functioning firmware version, remove the SD card and
restart the PBX.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Service and Maintenance
Performing a Restart Due to Errors via the SD Card
Restart
517