Configuring The Port On The Web Server; Configuring The Maximum Number Of Simultaneously Logged-In Users - Auerswald COMpact 3000 analog Operating Manual

1. Open the page CONFIGURATION > Configuration Wizard.
The configuration wizard is started.
Note: Pay attention to the information on the Web interface.
2. Click the corresponding buttons to switch from one page to another in the configu-
ration wizard:
Switches to the following page in the configuration wizard.
Switches to the preceding page in the configuration wizard.
Ends the configuration wizard immediately.
Saves the configured settings.

Configuring the Port on the Web Server

Port 80 is used for accessing the Web server by default.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Server configuration > Network.
2. Enter the port number (port) of the Web server in the Port of the webserver entry
field under Webserver configuration. The following entries are possible:
1 to 65535
Further steps:
– Save your settings before you leave the page.

Configuring the Maximum Number of Simultaneously Logged-in Users

The maximum number of simultaneously logged-in users indicates how many users may, in
addition to the administrator, log in simultaneously in the configuration manager.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Basic Knowledge Configuration Manager
Configuration Manager
Configuring the Port on the Web Server
91