Baby Call; Switching Baby Call On/Off - Auerswald COMpact 3000 analog Operating Manual

Baby Call

The baby call function provides a service in which after a configured delay time after picking up
the receiver, a telephone number is automatically dialled to call an internal or external
subscriber. This means, no key needs to be pressed. However, if a telephone is dialled
manually within the configured delay time, it has priority. It must be noted that on some
telephones, the numbers dialled are not sent immediately when the keys are pressed (often
there is approx. a half second delay).

Switching Baby Call On/Off

Switching this on/off can be done as follows:
• Separately for subscribers
• Separately for configurations
• Via the configuration manager
• Using a character string on the internal telephone
Switching Baby Call On/Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
User settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Baby call (connection without dialling) check box.
Enables baby call.
Disables baby call. (No other action is required.)
4. In the destination number entry field under Baby call (connection without
dialling), enter the destination number. The following entries are possible:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Functions
Baby Call
Switching Baby Call On/Off
215